DESCRIPTION：
Design Features: The system consists of D-type hydrapulper, ragger, cutting m
RECOMMEND：
Design Features:
The system consists of D-type hydrapulper, ragger, cutting machine, dregs well grab bucket impurity separator, drum screen and PLC controller.
Compared with the traditional hydrapulper, it could shorten the time of pulp breaking and increase productivity without increasing the volume and power. D-type hydrapulper rotor and the outlet tray are above the bottom surface of pulper vat to form a low-pressure fioe area around the rotor so as to make the coarse impurities flow from the heavy impurity outlet into the dregs well during puling and discharge impurities by grab buck et regularly. Affected by turning pulp flow, the winding impurities in waste paper are twisted into the rope, which can bu pulled out by the ragger. Then remain pulp and light impurities flowing into the dregs well will be sent to the impurity separator for procession with periodicity .The processed accept is integrated with the pulper accept and the n the pulp will enter the next working procedure. After washed, the coarse impurities will bi sent to the drum screen for discharge out of the system.
The recycled pulp will flow into the pulper. The working procedure of the complete system will be under control of PLC.
